Chassis
Multi-Purpose PANTER Chassis
For owners of Dakr, Terra, Vari, Jikov engines and other engine units equipped with the 80 mm centrifugal clutch, we prepared an innovation: a chassis for the attachment of a mower, mulcher, rotary snow plough, ploughshare, cart, turner-raker and chipper-shredder. This includes all extensions that are in use and will be in use on the Panter machine as described in detail on pages 2-5 of this catalogue. The Panter chassis has three optional speed for forward travel. It is produced in configurations for either two-stroke or four-stroke engines, they differ in the number of travel gears and the outlook is always the same. In the purchase order, please specify the typ of engine for which the chassis is designed.
Mower
|
Rotary snow plough
|
Mulcher
|
Chipper-shredder
|
Ploughshare
|
Cart
|
RZS 69 Mower Chassis
The RZS mower is created by putting the engine unit and the handlebar on the mowing chassis. The assembly is simple takes approximately 1 minute. The tube frame of the mower is carried on big wheels with V-shaped tread design of a diameter of 400 mm. Revolutions are transferred to the mowing disk with a wedge belt. The mower travel has a direct engagement in the massive gearing next to the travel wheels. The travel can be switch on and off with the control lever during operation. Thanks to the wheel size and low weight, the machine can be operated quite easily. The mowing chassis are equipped with the 80 mm centrifugal clutch for Terra, Vari and DAKR drive units. The Agzat and PA drive units can be equipped with a 120 mm centrifugal clutch.
RZS 69/V mower
|
RZS 69/W mower
|
Dakr RZS Tractor and Rotavator Chassis without Engine
The chassis has a centrifugal clutch with a diameter of 80 mm and is combined with the same engine as the mower chassis. The wheels have a diameter of 12“ and the machine is equipped with all necessary hinges and weights in the wheels and in the carriers.
The steel gearbox has 3 forward gears and 1 backward gear. 1. gear is suitable for tilling, lister ploughing, lifting and other ground cultivation jobs.
2. gear is used for rotavator mode, travel with cart etc. 3. gear is designed for travel with the cart. Gears are engaged with a lever on the gear at minimum engine speed. The gear has a lock pin to block changing the 2nd and 3rd gear during the heaviest job (tilling etc.) The complete small tractor including ballast weights has a weight of approximately 230 kg. Wheels are equipped with blockable free gear.
The rotavator is a useful companion and consists of a gearbox, rocking knives, a tiller blade and various covers. Rotavator serves for ground aeration in the spring after autumn tilling. You do not need to do the job with a hoe any more. The rotavator performance is high and the earth is neatly arranged. Rotavators can also be used for hoeing between rows. They can be made narrower by removing some of the tiller blades.
RZS rotavator
|
RZS tractor chassis
|
